H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage.
Precautionary Statement(s)
P234: Keep only in original packaging. P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection. P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P304 + P340 + P310: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Signal Word
Danger
Storage class
8B Non-combustible, corrosive hazardous materials
WGK
WGK 1 slightly hazardous to water
Disposal
13 Bases and alcoholates should be diluted if necessary by carefully stirring them into water and then neutralized (protective gloves, fume cupboard!) with hydrochloric acid (Cat. No. 100312). Before placing in container D, check the pH with pH universal indicator strips (Cat. No. 109535).
Safety Information
Categories of danger
corrosive
Product Usage Statements
Storage and Shipping Information
Storage
Store at +15°C to +25°C.
Packaging Information
Transport Information
Declaration (railroad and road) ADR, RID
UN 1824 , 8, II
Declaration (transport by air) IATA-DGR
UN 1824 , 8, II
Declaration (transport by sea) IMDG-Code
UN 1824 , 8, II, Segregation Group: 18 (Alkalis)
Supplemental Information
Specifications
Form
liquid
Amount-of-substance concentration
0.995 - 1.005
Measurement uncertainty
+/- 0.003
Traceability
NIST SRM
Accreditation: This volumetric solution is certified according to DIN EN ISO/IEC 17025. KGaA, Darmstadt, Germany is accredited as calibration laboratory D-K-15185-01-00 for amount-of-substance concentrations in volumetric solutions according to DIN EN ISO/IEC 17025 by DAkkS (Deutsche Akkreditierungsstelle). The accreditation certificate can be found at www.sigmaaldrich.com/ISO17025. The concentration is determined by volumetric titration and refers to 20°C. The certified value is traceable to a primary standard from the National Institute of Standards and Technology, Gaithersburg, USA (NIST SRM 84 potassium hydrogen phthalate ) by means of volumetric standard potassium hydrogen phthalate (article number 1.02400). This volumetric standard is certified by the accredited calibration laboratory of KGaA, Darmstadt, Germany according to DIN EN ISO 17025. The uncertainty is expressed as expanded measurement uncertainty with a coverage factor k=2 covering a confidence level of 95%. All measurements are carried out in the calibration laboratory D-K-15185-01-00 of KGaA, Darmstadt, Germany. Note: The titer is a correction factor to correct for variations of the volumetric solution, the titration equipment, the temperature and other laboratory conditions. For correct titration results it is recommended to determine a titer with the laboratory specific equipment and under laboratory specific conditions directly after opening a new bottle and at regular time intervals.