Millipore Sigma Vibrant Logo

MCGB10S02 Millidisk® Cartridge 10-stack 0.22 µm hydrophobic

View Products on
2  Easy-Open bag
Retrieving price...
Price could not be retrieved
Minimum Quantity is a multiple of
Maximum Quantity is
Upon Order Completion More Information
You Saved ()
Request Pricing
Limited AvailabilityLimited Availability
Limited Quantities Available
    Remaining : Will advise
      Remaining : Will advise
      Will advise
      Contact Customer Service
      Contact Customer Service


      Contact Customer Service


      Replacement Information
      Catalogue NumberMCGB10S02
      Trade Name
      • Millidisk®
      DescriptionMillidisk® Cartridge 10-stack 0.22 µm hydrophobic
      Product Information
      Device ConfigurationCartridge
      Maximum Differential Pressure, bar (psid)Forward: 4.1 bar (60 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 123 °C; Reverse: 0.7 bar (10 psid) @ 25 °C
      Maximum Inlet Pressure, bar (psi)Forward - 4.1 bar (60 psi) @ 25 °C; 1.7 bar (25 psi) @ 80 °C; 0.35 bar (5 psi) @ 123 °C; Reverse - 0.7 bar (10 psi) @ 25 °C
      Stack Design10 Stak
      Cartridge CodeNot Applicable
      Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
      Quality LevelMQ400
      Biological Information
      Bacterial EndotoxinsAqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
      Sterilization5 SIP cycles of 30 min @ 135 °C; 5 autoclave cycles of 60 min @ 126 °C
      Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
      Physicochemical Information
      Pore Size0.22 µm
      Bubble Point at 23 °C≥1170 mbar (17.0 psig) nitrogen with 100% IPA
      Gravimetric ExtractablesThe extractables level was equal to or less than 2.5 mg per sterilized device after 24 hours in a 70/30% IPA/water mixture at controlled room temperature.
      Non-Fiber ReleasingThis product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
      USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
      Filtration Area500 cm²
      Materials Information
      • Polyvinylidene Fluoride (PVDF)
      Device Material
      • Polysulfone
      Seal MaterialSilicone (SI)
      Support MaterialPolysulfone
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Packaging Information
      Material Size2
      Material PackageEasy-Open bag
      Transport Information
      Supplemental Information


      Millidisk® Cartridge 10-stack 0.22 µm hydrophobic SDS


      Safety Data Sheet (SDS) 

      Certificates of Quality

      Milildisk 10 Cartridge Durapore Membrane - C6BA13821
      Millidisk 10 Capsule Durapore Membrane - C7PA84614
      Millidisk 10 Cartidge Durapore Membrane - C5NA65889
      Millidisk 10 Cartridge - C6MA19139
      Millidisk 10 Cartridge Duapore Membrane
      Millidisk 10 Cartridge Durapore Membrane
      Millidisk 10 Cartridge Durapore Membrane C5AA59421
      Millidisk 10 Cartridge Durapore Membrane C6SA52541
      Millidisk 10 Cartridge Durapore Membrane C7BA77743
      Millidisk 10 Cartridge Durapore Membrane C0AB87091

      Technical Info

      Application Note: Best Practices for Managing Reverse Pressure Filter Impact
      Establishing Product Specific Bubble Point Specifications For Sterilizing-Grade Filters

      Data Sheet

      Durapore® Family Guide

      User Guides

      Hydrophilic Durapore® Cartridges and Capsules User Guide