MPGL20CA3 Gamma Compatible Millipak®-200 Filter Unit 0.22 µm 9/16 in. HB/HB

View Products on
3  Double Easy-Open bag
Retrieving price...
Price could not be retrieved
Minimum Quantity needs to be mulitiple of
Upon Order Completion More Information
You Saved ()
Request Pricing
Limited AvailabilityLimited Availability
Limited Quantities Available
    Remaining : Will advise
      Remaining : Will advise
      Will advise
      Contact Customer Service
      Contact Customer Service


      Contact Customer Service


      Replacement Information

      Key Specifications Table

      Catalogue NumberMPGL20CA3
      Trade Name
      • Millipak®
      DescriptionGamma Compatible Millipak®-200 Filter Unit 0.22 µm 9/16 in. HB/HB
      Product Information
      Device ConfigurationCapsule
      Connections, Inlet/Outlet14 mm (9/16 in.) Hose Barb
      Maximum Differential Pressure, bar (psid)Forward: 4.1 bar (60 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 123 °C; Reverse: 0.7 bar (10 psid) @ 25 °C
      Maximum Inlet Pressure, bar (psi)5.2 bar (75 psi) @ 25 °C
      Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
      Quality LevelMQ400
      Biological Information
      Bacterial EndotoxinsAqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
      Sterilization3 autoclave cycles of 90 min @ 123°C; not in-line steam sterilizable
      Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
      Physicochemical Information
      Pore Size0.22 µm
      Inlet ConnectionHose Barb
      Outlet ConnectionHose Barb
      Bubble Point at 23 °C≥3450 mbar (50 psig) air with water
      Flow Rate19 L/min @ 2.8 bar ΔP
      Gravimetric ExtractablesThe extractables level was equal to or less than 5 mg per device after 24 hours in water at controlled room temperature.
      Non-Fiber ReleasingThis product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
      USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
      Length13.0 cm (5.1 in.)
      Diameter7.6 cm (3.0 in.)
      Filtration Area1000 cm²
      Process Volume100 L
      Inlet Connection Diameter9/16 in.
      Outlet Connection Diameter9/16 in.
      Materials Information
      • Polyvinylidene Fluoride (PVDF)
      Device Material
      • Polycarbonate
      Support MaterialPolycarbonate
      Vent Cap MaterialPolyvinylidene fluoride (PVDF)
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Packaging Information
      Material Size3
      Material PackageDouble Easy-Open bag
      Transport Information
      Supplemental Information
      Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥200 mL


      Gamma Compatible Millipak®-200 Filter Unit 0.22 µm 9/16 in. HB/HB SDS


      Safety Data Sheet (SDS) 

      Certificates of Quality

      Durapore Cartridge - C8SA70419
      Miliidisk 200 Capsule Durapore Membrane- C6SA43376
      Milipak 200 Capsule Durapore Membrane - C8CA47117
      Milliapk 200 Capsule Durapore Membrane- C6PA38822
      Millidisk 200 Capsule Durapore Membrane- C7NA75596
      Millipak 200 Capsule Durapore Membrane C8PA51682
      Millipak 200 Capsule Druapore Membrane - C5EA06249
      Millipak 200 Capsule Duapore Membrane - C4BA25900
      Millipak 200 Capsule Duapore Membrane - C5HA06290
      Millipak 200 Capsule Durapore Membrane

      Technical Info

      Establishing Product Specific Bubble Point Specifications For Sterilizing-Grade Filters

      User Guides

      Opticap® XL Capsules and Opticap® XLT Capsules