Related Products By: Application Facete
Related Products By: Brand Facete
|Lab Water Purification > AFS® Clinical Laboratory Reagent Water (CLRW) Biomedical Water Systems|
AFS® D Systems provide a cost-effective, low maintenance water purification solution for analyzers with degassed pure water needs up to 320 L daily. AFS® D systems combine complementary water purification techniques; Complete pretreatment, advanced reverse osmosis (RO), Q-Gard® polishing pack, exposure to a bactericidal UV lamp, degassing, and final 0.22 µm filtration ensure a reliable and consistent water quality. Water produced by the systems complies with the Clinical and Laboratory Standards Institute® (CLSI) guideline for clinical laboratory reagent water (CLRW). Depending on daily volume needs, different production flow rates are available (8 and 16 L/h).
The systems are designed to fulfill accreditation needs (such as CAP™ 15189 accreditation to the ISO® 15189:2007 standard), and have full monitoring and water quality archiving capabilities that allow storage of up to six months of data. Activation of Millitrack® Essential e-Solution allows easy, rapid access to this information and also enhances data management control and provides remote system access.
User friendly & easy maintenance
Robust AFS® D systems require little maintenance, which means less analyzer downtime. Systems have a small footprint and can be installed wherever it is convenient in the laboratory: on a wall, on or under the bench, or on a cart. AFS® D systems are customizable with a wide range of options and accessories, including reservoirs, a sanitization kit and an aeration kit. Optimized lifetimes for the systems’ pretreatment and polishing packs, as well as low feed water consumption make AFS® D systems a cost-effective choice.
AFS® D Essential CLRW water (CLSI Clinical Laboratory Reagent Water)
|Resistivity at 25 °C||> 15 MΩ•cm|
|TOC||Typically < 30 ppb|
|Bacteria||< 1 CFU/mL|
|Silica||< 5 µg/L|
|Dissolved oxygen||Typically 6 - 8 ppm|
|System||Permeate Flow Rate||Peak Dispense Rate (to atmosphere)||Dispensing pressure to analyzer|
|AFS® 8D||8 L/h||Up to 0.6 L/min*||1 bar ± 10 % (13-16 psi)*|
|AFS® 16D||16 L/h||Up to 0.6 L/min*||1 bar ± 10 % (13-16 psi)*|
|* Dispensing to atmosphere (without any flow restriction due to the analyzer)|
|Feed water quality||Potable|
|Feed water pressure||1 - 6 bar|
|Feed water temperature||5 - 35 °C|
|Minimum flow rate feed||> 5 L min at 2 bar|
|Total chlorine *||< 3 ppm|
|Langelier Saturation Index||< 0.3|
|Maximum Fouling Index (SDI)||< 12|
|Tap water connection||½” Gaz M|
|* For feed water with total chlorine concentration between 1 ppm and 3 ppm, Millipore suggests the use of an external PrePak.|
|Dimensions (H x W x D)||470 x 268 x 426 mm (18.5 x 10.6 x 16.8 in)|
|Operating weight||< 22.2 kg (49 lb)|
|Electric power supply voltage||100 - 240 V +/- 10%|
|Electric power supply frequency||50 - 60 Hz +/- 10%|
|Power consumption||200 W or 250 VA|
|AFS® D main unit data connection||Ethernet (RJ45)|
The AFS® D system is tested by an independent and accredited company for compliance with the CE directives related to safety and electromagnetic compatibility. The report can be consulted on demand. The AFS® D system is built using components and practices recommended by UL and has been cUL marked. The registration can be verified on the UL web site ( http://www.ul.com).