Millipore Sigma Vibrant Logo

100345 Hydroiodic acid 67%

100345
View Pricing & Availability

Overview

Replacement Information

Key Specifications Table

Pricing & Availability

Catalog Number AvailabilityPackaging Qty/Pack Price Quantity
1003450250
Retrieving availability...
Limited AvailabilityLimited Availability
Stocked 
Discontinued
Limited Quantities Available
Available
    Remaining : Will advise
      Remaining : Will advise
      Will advise
      Contact Customer Service
      Contact Customer Service

      Glass bottle 250 ml
      Retrieving price...
      Price could not be retrieved
      Minimum Quantity is a multiple of
      Maximum Quantity is
      Upon Order Completion More Information
      You Saved ()
       
      Request Pricing
      Description
      Catalogue Number100345
      SynonymsHydrogen iodide solution
      References
      Product Information
      HS Code2811 19 80
      Quality LevelMQ300
      Applications
      Biological Information
      Physicochemical Information
      Boiling point127 °C (1013 hPa)
      Density1.97 g/cm3 (20 °C)
      Dimensions
      Materials Information
      Toxicological Information
      Safety Information according to GHS
      Hazard Pictogram(s) Hazard Pictogram(s)
      Hazard Statement(s)H314: Causes severe skin burns and eye damage.
      Precautionary Statement(s)P280: Wear protective gloves/ protective clothing/ eye protection/ face protection.
      P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
      P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
      P308 + P310: IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician.
      Signal WordDanger
      Storage class8B Non-combustible, corrosive hazardous materials
      WGKWGK 1 slightly hazardous to water
      Disposal12
      Inorganic acids and anhydrides thereof should first be diluted or hydrolyzed by stirring carefully into ice water and then neutralized (protective gloves, fume cupboard!) with sodium hydroxide solution (Cat. No. 105587). Before filling into container D, check the pH with pH universal indicator strips (Cat. No. 109535). Fuming sulfuric acid should be carefully stirred dropwise into 40 % sulfuric acid (Cat. No. 109286). Ensure that plenty of ice is available for cooling! When sufficiently cool, treat the highly concentrated sulfuric acid as described above. Analogous to this procedure, other anhydrides can be converted into their corresponding acids. Acid gases (e.g. hydrogen halide, chlorine, phosgene, sulfur dioxide) can be introduced into dilute sodium hydroxide solution and after neutralization disposed of in container D.
      Safety Information
      Hazard Symbols Hazard SymbolsCorrosive
      Categories of dangercorrosive
      R PhraseR 34
      Causes burns.
      S PhraseS 26-36/37/39-45
      In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, gloves and eye/face protection.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
      Product Usage Statements
      Storage and Shipping Information
      StorageStore at +2°C to +30°C.
      Packaging Information
      Transport Information
      Declaration (railroad and road) ADR, RIDUN 1787 , 8, II
      Declaration (transport by air) IATA-DGRUN 1787 , 8, II
      Declaration (transport by sea) IMDG-CodeUN 1787 , 8, II, Segregation Group: 1 (Acids)
      Supplemental Information
      Specifications
      Assay (acidimetric)≥ 67 %
      Chloride and Bromide (as Cl)≤ 200 ppm
      Phosphorous compounds (as PO₄)≤ 10 ppm
      Sulfate (SO₄)≤ 20 ppm
      Al (Aluminium)≤ 1 ppm
      As (Arsenic)≤ 1 ppm
      Ba (Barium)≤ 0.1 ppm
      Be (Beryllium)≤ 0.1 ppm
      Bi (Bismuth)≤ 0.1 ppm
      Ca (Calcium)≤ 1 ppm
      Cd (Cadmium)≤ 0.1 ppm
      Co (Cobalt)≤ 0.1 ppm
      Cr (Chromium)≤ 0.1 ppm
      Cu (Copper)≤ 0.1 ppm
      Fe (Iron)≤ 2 ppm
      Ge (Germanium)≤ 0.1 ppm
      K (Potassium)≤ 1 ppm
      Li (Lithium)≤ 0.1 ppm
      Mg (Magnesium)≤ 5 ppm
      Mn (Manganese)≤ 0.1 ppm
      Mo (Molybdenum)≤ 0.1 ppm
      Na (Sodium)≤ 1 ppm
      Ni (Nickel)≤ 0.1 ppm
      Pb (Lead)≤ 0.1 ppm
      Sr (Strontium)≤ 0.1 ppm
      Ti (Titanium)≤ 0.1 ppm
      Tl (Thallium)≤ 0.1 ppm
      V (Vanadium)≤ 0.1 ppm
      Zn (Zinc)≤ 0.5 ppm
      Zr (Zirconium)≤ 0.1 ppm
      Alkoxygroupspasses test
      Residue on ignition (as sulfate)≤ 50 ppm