Acids in Safety Bottles
Glass bottles have very long useful lives. As containers for all manner of chemicals, they remain a valuable inert material for everyday use in the laboratory. Yet however much care is taken, breakage does occur. It is something that simply has to reckoned with. Serious injury, contamination or consequential damage can be the result. You can avoid it with us!
All our experience in dealing with the hazard potential of acids in glass bottles has been incorporated in the specifications of the new "Safebreak" bottle, the safest safety bottle!
"Safebreak" is a glass bottle coated with polyethylene. Should e.g. the bottle fall and break, the liquid and glass splinters are reliably retained within the polyethylene coating. Each Safebreak bottle is fitted with a screw cap made of polyethylene but with an integrated PTFE component. This cap renders the bottle absolutely airtight so that no liquid or vapour can escape.
The computer-designed exclusive Safebreak bottle combines all the advantages in one: It meets all safety requirements and it ensures that the customer receives exactly the same quality of content as that dispatched from us. It can be incorporated in all logistic systems.
The Safebreak bottle withstands considerable impact force. Should a breakage occur, the acid and any glass splinters can be reliably contained and the user cannot be injured by escaping acid. Even after frequent opening and closing, the screw cap remains perfectly intact so that the environment is protected from leakage and contamination. The bottle can be easily and ecologically disposed of and re-used, just as the conventional glass bottle, and the PE is burnt off without affecting the environment. No vapor can contaminate the workplace environment!
|Acetic acid (glacial) 100% anhydrous for analysis EMSURE® ACS,ISO,Reag. Ph Eur||1.00063|
|Formic acid 98-100% for analysis EMSURE® ACS,Reag. Ph Eur||1.00264|
|Hydrochloric acid fuming 37% for analysis EMSURE® ACS,ISO,Reag. Ph Eur||1.00317|
|Nitric acid 65% for analysis EMSURE® ISO||1.00456|
|Nitric acid 69% for analysis EMSURE® ACS,Reag. Ph Eur||1.01799|
|Perchloric acid 70-72% for analysis EMSURE® ACS,ISO,Reag. Ph Eur||1.00519|
|ortho-Phosphoric acid 85% for analysis EMSURE® ACS,ISO,Reag. Ph Eur||1.00573|
|Sulfuric acid 95-97% for analysis EMSURE® ISO||1.00731|
|Sulfuric acid 95-97% for analysis (max. 0.005 ppm Hg) EMSURE® ACS,ISO,Reag. Ph Eur||1.00732|
|Sulfuric acid 98% for analysis EMSURE®||1.12080|