|Density||0.79 g/cm3 (20 °C)|
|Explosion limit||2 - 13.4 %(V) (2-Propanol)|
|Flash point||12 °C (2-Propanol)|
|Ignition temperature||425 °C (2-Propanol)|
|pH value||13 (H₂O, 20 °C)|
|Safety Information according to GHS|
|Hazard Statement(s)||H225: Highly flammable liquid and vapour.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H336: May cause drowsiness or dizziness.
|Precautionary Statement(s)||P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P240: Ground/bond container and receiving equipment.
P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
|Storage class||3 Flammable liquids|
|WGK||WGK 1 slightly hazardous to water|
Strongly contaminated halogen-free organic solvents: container A.
|Categories of danger||highly flammable, irritant|
|R Phrase||R 11-36/38-67
Highly flammable.Irritating to eyes and skin.Vapours may cause drowsiness and dizziness.
|S Phrase||S 16
Keep away from sources of ignition - No smoking.
|Product Usage Statements|
|Storage and Shipping Information|
|Storage||Store at +15°C to +25°C.|
|Declaration (railroad and road) ADR, RID||UN 2924 , 3 (8), II|
|Declaration (transport by air) IATA-DGR||UN 2924 , 3 (8), II|
|Declaration (transport by sea) IMDG-Code||UN 2924 , 3 (8), II, Segregation Group: 18 (Alkalis)|
|Amount-of-substance concentration||0.0995 - 0.1005|
|Measurement uncertainty||+/- 0.0003|
|The concentration is determined by volumetric titration and refers to 20°C.|
The certified value is traceable to a primary standard from the National Institute of Standards and Technology, Gaithersburg, USA (NIST SRM 84 potassium hydrogen phthalate ) by means of volumetric standard potassium hydrogen phthalate(Art. 1.02400). This volumetric standard is certified by the accredited calibration laboratory of KGaA, Darmstadt, Germany according to DIN EN ISO 17025. The uncertainty is expressed as expanded measurement uncertainty with a coverage factor k=2 covering a confidence level of 95%. All measurements are carried out in the laboratory of KGaA, Darmstadt, Germany.
Note: The titer is a correction factor to correct for variations of the volumetric solution, the titration equipment, the temperature and other laboratory conditions. For correct titration results it is recommended to determine a titer with the laboratory specific equipment and under laboratory specific conditions directly after opening a new bottle and at regular time intervals.