Millipore Sigma Vibrant Logo

KTGRA02TT3 Opticap Sterilizing Grade XL2 Aervent 0.2 µm 1-1/2 in. TC/TC

3  Double Easy-Open bag
Retrieving price...
Price could not be retrieved
Minimum Quantity is a multiple of
Maximum Quantity is
Upon Order Completion More Information
You Saved ()
Request Pricing
Limited Availability
Limited Availability
Limited Quantities Available
    Remaining : Will advise
      Remaining : Will advise
      Will advise
      Contact Customer Service
      Contact Customer Service


      Contact Customer Service


      Replacement Information
      Catalogue NumberKTGRA02TT3
      Trade Name
      • Opticap®
      DescriptionOpticap Sterilizing Grade XL2 Aervent 0.2 µm 1-1/2 in. TC/TC
      Product Information
      Device ConfigurationCapsule
      Connections, Inlet/Outlet38 mm (1-1/2 in.) Sanitary Flange
      Connections, Vent/Drain1/4 in. Hose Barb with double O-ring Seal
      Housing MaterialPolypropylene (PP)
      Maximum Differential Pressure, bar (psid)Forward: 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 4.1 bar (60 psid) @ 25 °C, intermittent
      Maximum Inlet Pressure, bar (psi)5.5 bar (80 psi) @ 23 °C; 2.8 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
      European Pressure Equipment DirectiveEMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
      Quality LevelMQ400
      Biological Information
      Sterilization30 autoclave cycles of 30 min @ 135 °C; not in-line steam sterilizable
      Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
      Physicochemical Information
      Pore Size0.2 µm
      Inlet ConnectionSanitary Flange
      Outlet ConnectionSanitary Flange
      Bubble Point at 23 °C≥1100 mbar (16 psig) nitrogen with 70/30 % IPA/water
      Gravimetric ExtractablesThe extractables level was equal to or less than 15 mg after 24 hours in a 70/30% IPA/water mixture at controlled room temperature.
      HydroCorr≤0.12 mL/min @ 2.6 bar (38 psig)
      Maximum Inlet Pressure (psig)80 psig
      Maximum Inlet Temperature25 °C
      Non-Fiber ReleasingThis product was manufactured with a PTFE membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
      USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
      Cartridge Nominal Length5.6 in. (14.3 cm)
      Length14.3 cm (5.6 in.)
      Diameter8.4 cm (3.3 in.)
      Filtration Area0.1 m²
      Inlet to Outlet Width14.3 cm (5.6 in.)
      Device Size2 in.
      Inlet Connection Diameter1-1/2 in.
      Outlet Connection Diameter1-1/2 in.
      Materials Information
      • Polytetrafluoroethylene (PTFE)
      Device Material
      • Polypropylene
      Seal MaterialSilicone (SI)
      Support MaterialPolypropylene
      Vent Cap MaterialPolypropylene (PP)
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Packaging Information
      Material Size3
      Material PackageDouble Easy-Open bag
      Transport Information
      Supplemental Information


      Opticap Sterilizing Grade XL2 Aervent 0.2 µm 1-1/2 in. TC/TC SDS


      Safety Data Sheet (SDS) 

      Certificates of Quality

      Aervent Membrane - C7PA86399
      Opticap XL 2 Capsule Aervent Membrane C5MA53876
      Opticap XL 2 Capsule Aervent Membrane C9MA89578R
      Opticap XL 2 Capsule Aerrvent Membrane C7SA13065
      Opticap XL 2 Capsule Aervent Membrane C6SA48459
      Opticap XL 2 Capsule Aervent MEmbrane C6AA75396
      Opticap XL 2 Capsule Aervent Media C9EA30856
      Opticap XL 2 Capsule Aervent Membrane
      Opticap XL 2 Capsule Aervent Membrane C7AA62031
      Opticap XL 2 Capsule Aervent Membrane C7EA14658

      Technical Info

      Autoclaving Guidelines for Opticap® XL and XLT Disposable Capsule Filters
      Bubble Point Test Method Using Aervent 0.2 µm Hydrophobic Membrane with 60/40 IPA

      Data Sheet

      Sterilizing-Grade Aervent®Filters