Millipore Sigma Vibrant Logo
Attention: We have moved. EMD Millipore products are no longer available for purchase on emdmillipore.com.Learn More

407143 Anti-IP₃ Receptor Rabbit pAb

This Anti-IP₃ Receptor Rabbit pAb is validated for use in ELISA, FC, Immunoblotting, IF, IHC, IP, Radioimmunoassay for the detection of IP₃ Receptor.

Anti-IP₃ Receptor Rabbit pAb MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
View Products on Sigmaaldrich.com
407143
Purchase on Sigma-Aldrich

Overview

Replacement Information

Key Specifications Table

Species ReactivityHostAntibody Type
B, Ca, H, M, Porcine, RRbPolyclonal Antibody

Products

Catalog NumberPackaging Qty/Pack
407143-100UG Plastic ampoule 100 μg
Description
OverviewRecognizes all of the ~260 kDa IP3 receptor subtypes.
Catalogue Number407143
Brand Family Calbiochem®
References
ReferencesBourguignon, L.Y.W., et al. 1994. J. Cell Physiol. 159, 29.
Bourguignon, L.Y.W., et al. 1993. J. Biol. Chem. 268, 7290.
Bourguignon, L.Y.W., et al. 1993. Cell Biol. Int. 17, 751.
Product Information
FormLiquid
FormulationIn 150 mM NaCl, 10 mM sodium phosphate, pH 7.5.
Preservative≤0.1% sodium azide
Quality LevelMQ100
Applications
Key Applications Enzyme-Linked Immunosorbent Assay
Flow Cytometry
Immunoblotting (Western Blotting)
Immunofluorescence
Immunohistochemistry
Immunoprecipitation
Radioimmunoassay
Application NotesELISA (1:2000)
Flow Cytometry (1:1000)
Immunoblotting (1:250)
Immunofluorescence (1:200)
Immunohistochemistry (1:200)
Immunoprecipitation (1:200)
Radioimmunoassay (1:10000)
Application CommentsVariables associated with assay conditions will dictate the proper working dilution.

Recommended Protocol for Immunoblotting using anti-IP3 Receptor Antibodies

NOTE: For protein loading, we recommend 1 x 106 cells/gel lane or 100 μg/gel lane.

• TBST
• 20 mM Tris-HCl, pH 7.6
• 150 mM NaCl
• 0.05% Tween®-20 detergent

1. After transfer, block in 15 ml of TBST with 5% dry milk (for polyclonal antibody) or 1% BSA or 1-2% gelatin (for monoclonal antibody).
2. Dilute primary antibody in 5% dry milk (for polyclonal antibody) or 1% BSA or 1-2% gelatin (for monoclonal antibody) in TBST.
3. Incubate with polyclonal antibody for 1 h or with monoclonal antibody for 2 h.
4. Rinse twice rapidly, followed by 1 x 15 min and 2 x 5 min washes with TBST.
5. Dilute secondary antibody also in 5% dry milk (for polyclonal antibody) or 1% BSA or 1-2% gelatin (for monoclonal antibody) in TBST, followed by HRP.
6. Shake for 1 h.
7. Rinse twice rapidly, followed by 1 x 15 min and 2 x 5 min washes with TBST.
8. Mix development solution (1:1) (Amersham ECL kit).
9. In between two pieces of transparency add development solution. Allow to sit for approximately 1 min before exposure to film.
Biological Information
Immunogena synthetic peptide corresponding to amino acids in the C-terminal cytoplasmic domain of the IP₃ receptor
HostRabbit
IsotypeIgG
Species Reactivity
  • Bovine
  • Canine
  • Human
  • Mouse
  • Porcine
  • Rat
Antibody TypePolyclonal Antibody
Concentration Label Please refer to vial label for lot-specific concentration
Physicochemical Information
Dimensions
Materials Information
Toxicological Information
Safety Information according to GHS
Safety Information
Product Usage Statements
Storage and Shipping Information
Ship Code Blue Ice Only
Toxicity Standard Handling
Storage -20°C
Avoid freeze/thaw Avoid freeze/thaw
Do not freeze Ok to freeze
Special InstructionsFollowing initial thaw, aliquot and freeze (-20°C).
Packaging Information
Transport Information
Supplemental Information
Specifications
Global Trade Item Number
Catalog Number GTIN
407143-100UG 04055977188622

Documentation

Anti-IP₃ Receptor Rabbit pAb SDS

Title

Safety Data Sheet (SDS) 

Anti-IP₃ Receptor Rabbit pAb Certificates of Analysis

TitleLot Number
407143

References

Reference overview
Bourguignon, L.Y.W., et al. 1994. J. Cell Physiol. 159, 29.
Bourguignon, L.Y.W., et al. 1993. J. Biol. Chem. 268, 7290.
Bourguignon, L.Y.W., et al. 1993. Cell Biol. Int. 17, 751.
Data Sheet

Note that this data sheet is not lot-specific and is representative of the current specifications for this product. Please consult the vial label and the certificate of analysis for information on specific lots. Also note that shipping conditions may differ from storage conditions.

Revision06-August-2007 RFH
ApplicationELISA (1:2000)
Flow Cytometry (1:1000)
Immunoblotting (1:250)
Immunofluorescence (1:200)
Immunohistochemistry (1:200)
Immunoprecipitation (1:200)
Radioimmunoassay (1:10000)
DescriptionRabbit polyclonal antibody purified by ammonium sulfate precipitation and ion-exchange (DEAE) column chromatography. Recognizes the ~260 kDa IP3 receptor protein.
BackgroundInositol 1,4,5-triphosphate (IP3) receptors have been shown to play an important role in the regulation of Ca2+ release from internal storage sites during cell activation.
HostRabbit
Immunogena synthetic peptide corresponding to amino acids in the C-terminal cytoplasmic domain of the IP₃ receptor
IsotypeIgG
Speciesbovine, canine, human, mouse, porcine, rat
FormLiquid
FormulationIn 150 mM NaCl, 10 mM sodium phosphate, pH 7.5.
Concentration Label Please refer to vial label for lot-specific concentration
Preservative≤0.1% sodium azide
CommentsVariables associated with assay conditions will dictate the proper working dilution.

Recommended Protocol for Immunoblotting using anti-IP3 Receptor Antibodies

NOTE: For protein loading, we recommend 1 x 106 cells/gel lane or 100 μg/gel lane.

• TBST
• 20 mM Tris-HCl, pH 7.6
• 150 mM NaCl
• 0.05% Tween®-20 detergent

1. After transfer, block in 15 ml of TBST with 5% dry milk (for polyclonal antibody) or 1% BSA or 1-2% gelatin (for monoclonal antibody).
2. Dilute primary antibody in 5% dry milk (for polyclonal antibody) or 1% BSA or 1-2% gelatin (for monoclonal antibody) in TBST.
3. Incubate with polyclonal antibody for 1 h or with monoclonal antibody for 2 h.
4. Rinse twice rapidly, followed by 1 x 15 min and 2 x 5 min washes with TBST.
5. Dilute secondary antibody also in 5% dry milk (for polyclonal antibody) or 1% BSA or 1-2% gelatin (for monoclonal antibody) in TBST, followed by HRP.
6. Shake for 1 h.
7. Rinse twice rapidly, followed by 1 x 15 min and 2 x 5 min washes with TBST.
8. Mix development solution (1:1) (Amersham ECL kit).
9. In between two pieces of transparency add development solution. Allow to sit for approximately 1 min before exposure to film.
Storage Avoid freeze/thaw
-20°C
Do Not Freeze Ok to freeze
Special InstructionsFollowing initial thaw, aliquot and freeze (-20°C).
Toxicity Standard Handling
ReferencesBourguignon, L.Y.W., et al. 1994. J. Cell Physiol. 159, 29.
Bourguignon, L.Y.W., et al. 1993. J. Biol. Chem. 268, 7290.
Bourguignon, L.Y.W., et al. 1993. Cell Biol. Int. 17, 751.