|Vitipore II Reverse Hot Water Flushing|
|Vitipore® II and Vitipore® II Plus Cartridge Filters|
Bevliner Cartridge HousingsSanitary filter housing design meets the needs of a range of beverage applications.
Learn More >>
Related Products By: Application Facete
|Dialysis and Filtration|
Related Products By: Brand Facete
|Biopharmaceutical Manufacturing > Downstream Processing > Virus Safety > Virus Filtration|
Vitipore™ II and Vitipore II Plus cartridges have a unique, patent-pending end cap and are built to support very demanding process conditions. Their mechanically robust design combined with high microorganism retention capabilities makes these filters uniquely suited for the microbiological stabilization of a variety of beverage products.
Vitipore II cartridges are constructed of a polyvinylidene fluoride Durapore® membrane with polypropylene molded components, offering broad chemical compatibility with commonly used sanitizing agents. The ability of these cartridges to withstand repeated cleaning and sanitizing cycles leads to longer filter life and lower overall filtration costs.
Vitipore II Plus cartridges have an additional prefilter layer of cellulose esters for higher throughputs, longer filter life, and better performance, particularly in difficult-to-filter liquids with heavy particulate load or high colloidal content.
Ideal for the removal of particles and beverage spoiling microorganisms
- Innovative cartridge design generates high flow rates and increased durability
- Superior mechanical robustness resulting from a unique, patented end-cap design
- Ultra-thin, polyvinylidene fluoride membrane ensures product quality and taste
- Ease of cleaning and chemical compatibility extends the filter life for lower overall filtration costs and improved process economics
- Wide selection of configurations to meet your process needs
Vitipore II and Vitipore II Plus cartridges are 100% integrity tested during production. Each filter package includes a Certificate of Quality, which certifies that the filters meet Quality Assurance lot release criteria. The Certificate of Quality includes the microorganism retention claims.
Vitipore II are manufactured in a facility whose Quality Management System is approved by an accredited registering body to the ISO 9000 Quality Systems Standard.
Applying membrane filtration to the manufacturing of wine, cider, beer, bottled water and other beverages helps ensure complete removal of particles or microorganisms.
Constructed with Durapore polyvinylidene fluoride membrane Vitipore II and Vitipore II Plus are ideal for beverage applications where attention to filtration costs, ease of cleaning, compatibility, durability and low extractables is essential.
|Reduction Titer, per cm2||Vitipore II||Vitipore II Plus|
|per 10-inch Cartridge|
|Materials of Construction|
|Filter Membrane||Polyvinylidene Fluoride (PVDF)|
|Prefilter (Vitipore II Plus only)||Mixed Cellulose Esters (MCE)|
|Filtration Area||0.78 m²|
|Maximum Differential Pressure, bar (psid)||Forward: 5.5 bar (80 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 135 °C. Reverse: 3.5 bar (50 psid) @ 25 °C, intermittent|
|Maximum Operating Temperature||80° C|
|Bubble Point at 23 °C|
|CVBW||≥3100 mbar (45 psig) air with water|
|CVBB, CVPB||≥1930 mbar (28 psig) air with water|
|CVBY, CVPY||≥965 mbar (14 psig) air with water|
|Air Diffusion at 23 °C|
|CVBW||≤15.2 mL/min @ 2.75 bar (40 psig) in water|
|CVBB, CVPB||≤17.1 mL/min @ 1.5 bar (22 psig) in water|
|CVBY, CVPY||≤9.1 mL/min @ 620 mbar (9 psig) in water|
|Cleanliness||Cartridge effluent meets the requirements for USP sterile water after a water flush of 1 L per 10-inch autoclaved cartridge|
|Sterilization||100 SIP cycles of 30 min @ 109 °C; hot water sanitized 30 times for 30 min @ 80 °C maximum|
|Good Manufacturing Practices||These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.|
|Non-Fiber Releasing||Component materials meet the "non-fiber releasing" criteria as defined in 21 CFR 210.3 (b) (6).|
|Component Material Toxicity||Component materials meet the criteria of the USP <88> Reactivity Test for Class VI Plastics. These products meet the requirements of the USP <88> Safety Test, utilizing a 0.9% sodium chloride extraction.|
|Indirect Food Additive||All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.|