A part of MilliporeSigma

KGW6A1THH1 | Opticap® XLT10 Polysep® II 1.0/0.5 µm 5/8 in. HB

KGW6A1THH1
1  Double Easy-Open bag
Retrieving price...
Price could not be retrieved
Minimum Quantity needs to be mulitiple of
Upon Order Completion More Information
You Saved ()
 
Request Pricing
Limited AvailabilityLimited Availability
Stocked 
Discontinued
Limited Quantities Available
Available
    Remaining : Will advise
      Remaining : Will advise
      Will advise
      Contact Customer Service

       

      Contact Customer Service

      Click To Print This Page

      Overview

      Replacement Information

      Key Specifications Table

      Description
      Catalogue NumberKGW6A1THH1
      Trade Name
      • Opticap®
      DescriptionOpticap® XLT10 Polysep® II 1.0/0.5 µm 5/8 in. HB
      References
      Product Information
      FormatDouble Layer
      Device ConfigurationCapsule
      Connections, Inlet/Outlet16 mm (5/8 in.) Hose Barb
      Housing MaterialPolypropylene (PP)
      Maximum Differential Pressure, bar (psid)3.5 bar (50 psid) @ 25 °C
      Maximum Inlet Pressure, bar (psi)5.5 bar (80 psi) @ 23 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
      European Pressure Equipment DirectiveEMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
      Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
      Prefilter MaterialBorosilicate Glass Fiber (BGF)
      T-line/Gauge PortT-line
      Applications
      Biological Information
      Bacterial EndotoxinsAqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
      MediaPolysep™ II
      Sterilization3 autoclave cycles of 30 min @ 121 °C; not in-line steam sterilizable
      Physicochemical Information
      Inlet ConnectionHose Barb
      Outlet ConnectionHose Barb
      Gravimetric ExtractablesThe extractables level was equal to or less than 145 mg per capsule after a 5 L flush and 24 hours in water at controlled room temperature.
      Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
      Maximum Inlet Pressure (psig)80 psig
      Maximum Inlet Temperature25 °C
      Non-Fiber ReleasingThis product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
      USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
      Dimensions
      Cartridge Nominal Length10 in. (25 cm)
      Length37.6 cm (14.8 in.)
      Filtration Area0.46 m²
      Inlet to Outlet Width19.8 cm (7.8 in.)
      Device Size10 in.
      Inlet Connection Diameter5/8 in.
      Nominal Pore Size1.0 / 0.5 µm
      Outlet Connection Diameter5/8 in.
      Materials Information
      Chemistry
      • Mixed Cellulose Esters (MCE)
      Device Material
      • Polypropylene
      Seal MaterialSilicone (SI)
      Support MaterialPolypropylene
      Vent Cap MaterialPolypropylene (PP)
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Packaging Information
      Material Size1
      Material PackageDouble Easy-Open bag
      Transport Information
      Supplemental Information
      Specifications
      Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L

      Documentation

      SDS

      Title

      Safety Data Sheet (SDS) 

      Certificates of Quality

      Title
      Opticap XLT 10 Capsule Polysep II Media
      Opticap XLT 10 Capsule Polysep II Media C5JA34773
      Opticap XLT 10 Capsule Polysep II Media - C2PA90115
      Opticap XLT 10 Capsule Polysep II Media - C3CA86267
      Opticap XLT 10 Capsule Polysep II Media - C3KA80917
      Opticap XLT 10 Capsule Polysep II Media - C4CA45073
      Opticap XLT 10 Capsule Polysep II Media - C6BA18551
      Opticap XLT 10 Capsule Polysep II Media - SAMPLE1521
      Opticap XLT 10 Capsule Polysep II Media C5MA58441
      Opticap XLT 10 Capsule Polysep II Media C6AA00562
      Opticap XLT 10 Capsule Polysep II Media C6DA51858
      Opticap XLT 10 Capsule Polysep II Media C6EA61576
      Opticap® XLT 10 Capsule Polysep™ II Media - C4NA08462
      Opticap® XLT Capsule Filter with Polysep™ II Media - C2AA79412