KHGES006FB3 Opticap® Sterile XL 600 Millipore Express® SHC 0.5/0.2 µm 3/4 in. TC-9/16 in. HB with Bell

3  Double Easy-Open bag
Retrieving price...
Price could not be retrieved
Minimum Quantity needs to be mulitiple of
Upon Order Completion More Information
You Saved ()
Request Pricing
Limited AvailabilityLimited Availability
Limited Quantities Available
    Remaining : Will advise
      Remaining : Will advise
      Will advise
      Contact Customer Service
      Contact Customer Service


      Contact Customer Service


      Replacement Information

      Key Specifications Table

      Catalogue NumberKHGES006FB3
      Trade Name
      • Millipore Express®
      DescriptionOpticap® Sterile XL 600 Millipore Express® SHC 0.5/0.2 µm 3/4 in. TC-9/16 in. HB with Bell
      Product Information
      Device ConfigurationCapsule
      Connections, Inlet/Outlet19 mm (3/4 in.) Sanitary Flange / 14 mm (9/16 in.) Hose Barb with Filling Bell
      Connections, Vent/Drain1/4 in. Hose Barb with double O-ring seal
      Housing MaterialPolypropylene (PP)
      Maximum Differential Pressure, bar (psid)Forward: 6.9 bar (100 psid) intermittent @ 25 °C; 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 2.1 bar (30 psid) @ 25 °C, intermittent
      Maximum Inlet Pressure, bar (psi)6.9 bar (100 psi) intermittent @ 23 °C; 5.5 bar (80 psi) @ 23 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
      European Pressure Equipment DirectiveEMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
      Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
      Biological Information
      Bacterial EndotoxinsAqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
      MediaMillipore Express® SHC
      Sterilization3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable
      Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
      Physicochemical Information
      Pore Size0.5 / 0.2 µm
      Inlet ConnectionSanitary Flange
      Outlet ConnectionHose Barb with Bell
      Air Diffusion at 23 °C≤3.7 mL/min @ 2.8 bar (40 psig) in water
      Bubble Point at 23 °C≥4000 mbar (58 psig) air with water
      Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
      Maximum Inlet Pressure (psig)80 psig
      Maximum Differential Pressure80 psi (5.5 bar) continuous
      100 psi (6.9 bar) intermittent
      Maximum Inlet Temperature25 °C
      Non-Fiber ReleasingThis product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
      TOC/ConductivityAfter sterilization and a controlled water flush of 3.0 L, samples exhibited less than 500 ppb TOC per USP <643> and less than 1.3 µS/cm per USP <645> at 25 °C.
      USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
      Cartridge Nominal Length6.5 in. (16.5 cm)
      Length16.5 cm (6.5 in.)
      Diameter5.6 cm (2.2 in.)
      Filtration Area590 cm²
      Inlet to Outlet Width16.5 cm (6.5 in.)
      Inlet Connection Diameter3/4 in.
      Outlet Connection Diameter9/16 in.
      Materials Information
      • Polyethersulfone (PES)
      Device Material
      • Gamma stable polypropylene/Polysulfone
      Seal MaterialSilicone (SI)
      Support MaterialPolyethylene
      Vent Cap MaterialGamma stable polypropylene (PP)
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Packaging Information
      Material Size3
      Material PackageDouble Easy-Open bag
      Transport Information
      Supplemental Information
      Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥1 L


      Quality Management Dossier


      Certificates of Quality

      Opticap XL 10 Capsule Millipore Express SHC Membrane C8AA17861
      Opticap XL 600 Capsule Miilipore Express SHC Membrane C6NA18384
      Opticap XL 600 Capsule Millipore Express SHC Membrane C7DA06976
      Opticap XL 600 Capsule Millipore Express SHC Membrane C7HA11918
      Opticap XL 600 Capsule Millipore Express SHC Membrane C7MA66092
      Opticap XL 600 Capsule Millipore Express SHC Membrane C7AA64596
      Opticap XL 600 Capsule Millipore Express SHC Membrane C8AA01250
      Opticap XL 600 Capsule Millipore Express SHC Membrane C8DA51948
      Opticap XL 600 Capsule Millipore Express SHC Membrane C8PA59123
      Opticap XL 600 Capsule Millipore Express SHF Membrane C8JA87782

      Technical Info

      Autoclaving Guidelines for Opticap® XL and XLT Disposable Capsule Filters
      Extended bacterial retention testing of Millipore Express® 0.2 μm filters in a continuous flow system
      Filter Integrity Test Methods

      Data Sheet

      Millipore Express® SHC Hydrophilic Filters

      User Guides

      Filters with Millipore Express® Membrane -Wetting Instructions, Integrity Testing and Drying Guidelines
      Opticap® XL Capsules and Opticap® XLT Capsules
      Vmax Constant Pressure
      Wetting Instructions for Filter Units with Durapore Membrane