A part of MilliporeSigma

KVVLG2ZTT1 | Opticap® Gamma Compatible XLT20 Durapore® 0.1 µm 1.5 in TC/TC w/gauge port

1  Double Easy-Open bag
Retrieving price...
Price could not be retrieved
Minimum Quantity needs to be mulitiple of
Upon Order Completion More Information
You Saved ()
Request Pricing
Limited AvailabilityLimited Availability
Limited Quantities Available
    Remaining : Will advise
      Remaining : Will advise
      Will advise
      Contact Customer Service


      Contact Customer Service

      Click To Print This Page


      Replacement Information

      Key Specifications Table

      Catalogue NumberKVVLG2ZTT1
      Trade Name
      • Opticap®
      DescriptionOpticap® Gamma Compatible XLT20 Durapore® 0.1 µm 1.5 in TC/TC w/gauge port
      Product Information
      Device ConfigurationCapsule
      Connections, Inlet/OutletSanitary Flange/Sanitary Flange
      Connections, Vent/Drain1/4 in. Hose Barb with double O-ring Seal; 3/4 in. Gauge Port T-Line Side
      Housing MaterialPolypropylene (PP)
      Maximum Differential Pressure, bar (psid)Forward: 5.5 bar (80 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C. Reverse: 2.8 bar (40 psid) @ 25 °C, intermittent
      Maximum Inlet Pressure, bar (psi)5.5 bar (80 psi) @ 25 °C; 2.8 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
      European Pressure Equipment DirectiveEMD Millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
      Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
      T-line/Gauge PortT-line with 3/4 in. Gauge Port T-line side
      Biological Information
      Sterilization3 autoclave cycles of 60 min @ 126 °C; capable of 45 kilogray (4.5 Megarad) gamma exposure; not in-line steam sterilizable
      Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
      Physicochemical Information
      Pore Size0.1 µm
      Inlet ConnectionSanitary Flange
      Outlet ConnectionSanitary Flange
      Air Diffusion at 23 °C≤40 mL/min @ 3.9 bar (56 psig) in water
      Bubble Point at 23 °C≥4830 mbar (70 psig) air with water
      Gravimetric ExtractablesThe extractables level was equal to or less than 50 mg per capsule after 24 hours in water at controlled room temperature.
      Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
      Maximum Inlet Pressure (psig)80 psig
      Maximum Inlet Temperature25 °C
      Non-Fiber ReleasingThis product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
      USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
      Cartridge Nominal Length20 in. (50 cm)
      Device Size20 in.
      Inlet Connection Diameter1-1/2 in.
      Outlet Connection Diameter1-1/2 in.
      Materials Information
      • Polyvinylidene Fluoride (PVDF)
      Device Material
      • Gamma-stable polypropylene
      Seal MaterialSilicone (SI)
      Support MaterialPolyester
      Vent Cap MaterialPolypropylene (PP)
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Packaging Information
      Material Size1
      Material PackageDouble Easy-Open bag
      Transport Information
      Supplemental Information