|Millidisk® Cartridges and Millipak® Disposable Capsules|
|Sanitary Millidisk® Filter Housings|
|Hydrophilic Durapore® Cartridges and Capsules User Guide|
Optiseal-M Filters with Hydrophobic Aervent MembraneOptiseal-M filters with Aervent membrane are designed for sterilizing applications, removing particles and microorganisms from gases and solvents.
Learn More >>
Related Products By: Application Facete
|Dialysis and Filtration|
Related Products By: Brand Facete
|Biopharmaceutical Manufacturing > Downstream Processing > Multi-use Processing Systems > Filter Housings|
These cartridge housings are designed to handle the most critical sterile filtration steps for industrial processing applications.
This line of sanitary 316L stainless steel housings features T-line and In-line versions. Both come standard with sanitary vents. The In-line come with sanitary drain.
Each housing is tested to ensure that it meets specifications for quality standards. To demonstrate Millipore's commitment to quality, each housing includes a Certificate of Quality certifying that the housing conforms to specifications for material, surface finish, pressure rating and dimensions. Each certificate is lot and catalogue number specific.
- Sterile filtration of aqueous and solvent-based solutions
- Sterile tank venting
- Sterile gas filtration
|Inlet to Outlet Width||Length||Weight|
|In-line 10 stacks Housing||13.2 cm (5.2 in.)||13.2 cm (5.2 in.)||2.3 kg (5.0 lb.)|
|In-line 40 stacks Housing||19.8 cm (7.8 in.)||19.8 cm (7.8 in.)||2.7 kg (6 lb.)|
|T-line 40 stacks Housing||17.8 cm (7 in.)||22.1 cm (8.7 in.)||2.95 kg (6.5 lb.)|
|Materials of Construction|
|Housing||316L stainless steel|
|Clamp||304 stainless steel|
|Maximum Operating Pressure, bar (psi)||10 bar (145 psi)|
|Wetted Surfaces||Fine electropolished sanitary finish, Ra <0.5 µm (20 µin)|
|Exterior Surfaces||Sanitary finish Ra <0.8 µm (32 µin)|
|Inlet/Outlet||1 in. Sanitary Flange|
|Gauge Port||1 in. Sanitary Flange|
|Cartridge||Code M (2-118) O-rings|
|Dome to Base||3 in. O-ring (2-335)|
|Sterilization||Millidisk housings may be in-line steam sterilized, autoclaved at 126 °C for 30 minutes, or hot water sanitized|