A part of MilliporeSigma

MCGL10S03 | Millidisk® Cartridge 10-stack 0.22 µm Hydrophilic

MCGL10S03
3  Double Easy-Open bag
Retrieving price...
Price could not be retrieved
Minimum Quantity needs to be mulitiple of
Upon Order Completion More Information
You Saved ()
 
Request Pricing
Limited AvailabilityLimited Availability
Stocked 
Discontinued
Limited Quantities Available
Available
    Remaining : Will advise
      Remaining : Will advise
      Will advise
      Contact Customer Service

       

      Contact Customer Service

      Click To Print This Page

      Overview

      Replacement Information

      Key Specifications Table

      Description
      Catalogue NumberMCGL10S03
      Trade Name
      • Millidisk®
      DescriptionMillidisk® Cartridge 10-stack 0.22 µm Hydrophilic
      References
      Product Information
      Device ConfigurationCartridge
      Maximum Differential Pressure, bar (psid)Forward: 4.1 bar (60 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 123 °C; Reverse: 0.7 bar (10 psid) @ 25 °C
      Maximum Inlet Pressure, bar (psi)Forward - 4.1 bar (60 psi) @ 25 °C; 1.7 bar (25 psi) @ 80 °C; 0.35 bar (5 psi) @ 123 °C; Reverse - 0.7 bar (10 psi) @ 25 °C
      Stack Design10 Stak
      Cartridge CodeNot Applicable
      Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
      Applications
      Biological Information
      Bacterial EndotoxinsAqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
      MediaDurapore®
      Sterilization5 SIP cycles of 60 min @ 135 °C; 5 autoclave cycles of 60 min @ 126 °C
      Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
      WettabilityHydrophilic
      Physicochemical Information
      Pore Size0.22 µm
      Bubble Point at 23 °C≥3450 mbar (50 psig) air with water
      Flow Rate15 L/min @ 3.5 bar ΔP
      Gravimetric ExtractablesThe extractables level was equal to or less than 2.5 mg per sterilized device after 24 hours in water at controlled room temperature.
      Non-Fiber ReleasingThis product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
      USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
      Dimensions
      Filtration Area500 cm²
      Materials Information
      Chemistry
      • Polyvinylidene Fluoride (PVDF)
      Device Material
      • Polysulfone
      Seal MaterialSilicone (SI)
      Support MaterialPolysulfone
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Packaging Information
      Material Size3
      Material PackageDouble Easy-Open bag
      Transport Information
      Supplemental Information
      Specifications
      Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥200 mL

      Documentation

      SDS

      Title

      Safety Data Sheet (SDS) 

      Certificates of Quality

      Title
      Miilidisk Hydrophilic Filter Unit - C1MA25147
      Milldisk Hydrophillic Filter Unit - C1EA66795
      Millidaik 10 Cartridge Durapore Membrane - C3DA97016
      Millidisk 10 Cartidge Durapore Membrane - C5PA84671
      Millidisk 10 Cartridge Durapore Membrane
      Millidisk 10 Cartridge Durapore Membrane
      Millidisk 10 Cartridge Durapore Membrane
      Millidisk 10 Cartridge Durapore Membrane
      Millidisk 10 Cartridge Durapore Membrane
      Millidisk 10 Cartridge Durapore Membrane C6SA50558