A part of MilliporeSigma

CS20MS01H1 | Clarisolve® 20 µm Lab Scale Depth Filters, 0.014 m2 (0.15 ft2)

CS20MS01H1
1  
Retrieving price...
Price could not be retrieved
Minimum Quantity needs to be mulitiple of
Upon Order Completion More Information
You Saved ()
 
Request Pricing
Limited AvailabilityLimited Availability
Stocked 
Discontinued
Limited Quantities Available
Available
    Remaining : Will advise
      Remaining : Will advise
      Will advise
      Contact Customer Service

       

      Contact Customer Service

      Click To Print This Page

      Overview

      Replacement Information

      Key Specifications Table

      Description
      Catalogue NumberCS20MS01H1
      Trade Name
      • Clarisolve®
      DescriptionClarisolve® 20 µm Lab Scale Depth Filters, 0.014 m2 (0.15 ft2)
      References
      Product Information
      Device Configurationlab scale Pod
      Filter Grade20MS
      Maximum Differential Pressure, bar (psid)Maximum: 2.1 bar (30 psid) @ 37 °C; Forward: 2.1 bar (30 psid) @ 4 ° or 37 °C; Reverse: 2.1 bar (30 psid) @ 37 °C
      Applications
      ApplicationHigh-density cell cultures
      Biological Information
      Bacterial EndotoxinsAqueous extraction contains <0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) clot test technique (on filter media only)
      SterilizationIntegrity is maintained after 2 autoclave cycles of 60 minutes at 123 °C.
      Physicochemical Information
      Product Water Conductivity at 25°C0.80 – 1.59 µS/cm post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. A sample of filtrate was pulled every 2 minutes during flush and tested for conductivity.
      Dimensions
      Height14 cm (5.3 in.)
      Width7.4 cm (2.9 in.)
      Length22 cm (8.5 in.)
      Filtration Area0.014 m²
      Materials Information
      Chemistry
      • Polypropylene (PP)
      Device Material
      • Polypropylene
      Materials of ConstructionPolypropylene and Millistak+® media
      Seal MaterialThermo Plastic Elastomer (TPE)
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Packaging Information
      Material Size1
      Transport Information
      Supplemental Information
      Specifications
      Metals
      • Per 24-hour static soak in 10 liters pure water post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 10 liters per ft2 (100 L/m2) of surface area:
        Aluminum (AI): ≤0.035 mg/ft2
        Antimony (Sb): 0.000 mg/ft2
        Arsenic (As): ≤0.010 mg/ft2
        Barium (Ba): ≤0.148 mg/ft2
        Bismuth (Bi): below detectable limits
        Boron (B): below detectable limits
        Cadmium (Cd): 0.000 mg/ft2
        Calcium (Ca): ≤20.6 mg/ft2
        Chromium (Cr): ≤0.049 mg/ft2
        Cobalt (Co): <0.001 mg/ft2
        Copper (Cu): ≤0.012 mg/ft2
        Gallium (Ga): below detectable limits
        Germanium (Ge): below detectable limits
        Iron (Fe): ≤0.044 mg/ft2
        Lead (Pb): 0.000 mg/ft2
        Lithium (Li): ≤0.022 mg/ft2
        Magnesium (Mg): ≤7.88 mg/ft2
        Manganese (Mn): ≤0.012 mg/ft2
        Mercury (Hg): <0.001 mg/ft2
        Molybdenum (Mo): ≤0.108 mg/ft2
        Nickel (Ni): ≤0.010 mg/ft2
        Potassium (K): ≤2.09 mg/ft2
        Silver (Ag): below detectable limits
        Sodium (Na): ≤60.8 mg/ft2
        Strontium (Sr): ≤0.50 mg/ft2
        Tin (Sn): 0.000 mg/ft2
        Titanium (Ti): ≤0.142 mg/ft2
        Tungsten (W): ≤0.008 mg/ft2
        Vanadium (V): ≤0.246 mg/ft2
        Zinc (Zn): ≤0.020 mg/ft2
      TOC1.4–2.1 µg/L post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. At the end of the flush, a sample was pulled for TOC typical values.