Milli-Q® Advantage A10 Water Purification System

The most advanced ultrapure water system producing Milli-Q® water quality

Documents associés

Milli-Q Advantage

Aperçu

Caractéristiques

Guide d'achat

Go
Water System Supprimer le tri & les filtres
Référenceicon Descriptionicon Conditionnementicon
Z00Q0V0WWUnité de production du système de purification d'eau Milli-Q Advantage A101 Prix & Disponibilité

This is a web reference. The end letters "WW" will be replaced by the country letters on your invoice to have the right shipping kit for the country. This ensures you receive the user manual in local language and a power cord adapted to the local electrical network.

Retourner en haut de la page

System Consumables Supprimer le tri & les filtres
Référenceicon Descriptionicon Conditionnementicon
QGARDT1X1Pack de purification Q-Gard T1 (alimenté par un système Elix, eau osmosée, distillée)1 Prix & Disponibilité
QGARDT2X1Pack de purification Q-Gard T2 (alimenté par de l'eau déminéralisée)1 Prix & Disponibilité
QGARDT3X1Pack de purification Q-Gard T3 (alimenté par de l'eau déminéralisée avec sédiments élevés)1 Prix & Disponibilité
QGARDTBX1Q-Gard® T Boron Purification Cartridge1 Prix & Disponibilité
QTUM0TEX1Cartouche de filtration Quantum TEX (Résine Organex)1 Prix & Disponibilité
QTUM0TIX1Cartouche de filtration Quantum TIX (Résine Ionex)1 Prix & Disponibilité
ZFA10UVM1Lampe U.V. pour l'analyseur de C.O.T. A101 Prix & Disponibilité
ZMQUVLP01Lampe U.V. de rechange1 Prix & Disponibilité

Retourner en haut de la page

Application-Paks Supprimer le tri & les filtres
Référenceicon Descriptionicon Conditionnementicon
CDUFBI001Cartouche d'ultrafiltration BioPak1 Prix & Disponibilité
EDSPAK001Cartouche EDS-Pak1 Prix & Disponibilité
LCPAK0001LC-Pak pour la production d'au moins 500 l d'eau ultra pure pour l'analyse de traces de substances organiques. Recommandée pour les applications sensibles aux traces, telles que l'UPLC ou la LC-MS.1 Prix & Disponibilité
MPGL04GK2Unité de filtration Millipak-40, 0,22 µm, raccords NPT2 Prix & Disponibilité
MPGP04001Unité de filtration Millipak Express 40, 0,22 µm, non stérile1 Prix & Disponibilité
V0CPAK001VOC-Pak pour la production de 300 l d'eau dépourvue de C.O.V.1 Prix & Disponibilité

Retourner en haut de la page

Accessories Supprimer le tri & les filtres
Référenceicon Descriptionicon Conditionnementicon
ACTIC0M05Millitrack® Basic e-Solution1 Prix & Disponibilité
ACTIC0M06Millitrack® Compliance MQ ADV1 Prix & Disponibilité
EDSKIT001Kit de conditionnement et d'installation de la cartouche EDS-Pak1 Prix & Disponibilité
FL0RDC001Régulateur de débit du Q-POD1 Prix & Disponibilité
P0DC0VER1Protection du POD en crystal de silicone1 Prix & Disponibilité
WMBQP0D01Équerre de montage mural pour Q-POD1 Prix & Disponibilité
WMBSMT002Équerre de montage mural pour systèmes de purification d'eau1 Prix & Disponibilité
ZFC0NDCL1Cellule de mesure de la conductivité de l'eau d'alimentation1 de chaque Prix & Disponibilité
ZFWATDET4Détecteur d'eau, 230 V/50 Hz1 Prix & Disponibilité
ZMQSFTS01Pédale de commande pour système de purification d'eau1 Prix & Disponibilité
ZMQSP0D01Unité de distribution d'eau Q-POD1 Prix & Disponibilité

Milli-Q® Advantage A10 is designed to operate properly without the need of a sanitization. However, in case the procedures applied in your laboratory require the regular sanitization of laboratory instruments, a kit with procedure is available.

Retourner en haut de la page

    Documentation

    Brochure

    Titre
    Milli-Q® Advantage A10 Water Purification Systems
    Systèmes de purification d'eau Milli-Q® Advantage A10®

    Informations techniques

    Titre
    High Purity Water for Inorganic Analysis
    Milli-Q Biocel System,Optimized Ultrapure Water Quality for PCR
    Milli-Q Element System Water Quality Assessment
    Nerve Cell Culture via Pyrogen-free Water: Pyrogen Removal of the Milli-Q PF Water System
    Total Organic Carbon in High-Purity Water
    Ultrapure Water for Elemental Analysis down to ppt levels

    Références bibliographiques | 75 Disponible | Voir toutes les références

    Aperçu de la référence bibliographiqueApplication
    Quantification of 2-hydrazinopyridine derivatized steroid hormones in fathead minnow (Pimephales promelas) blood plasma using LC-ESI+/MS/MS
    D. Hala, M.D. Overturf, L.H. Petersen, D.B. Huggett
    J. Chromatogr. B 879 591–598 2011

    Afficher le résumé
    Assessment of the acute toxicity of triclosan and methyl triclosan in wastewater based on the bioluminescence inhibition of Vibrio fischeri
    M. Farré, D. Asperger, L. Kantiani, S. González, M. Petrovic, D. Barceló
    Anal Bioanal Chem 390 1999–2007 2008

    Afficher le résumé
    Extraction of extracellular polymeric substances from extreme acidic microbial biofilms
    A. Aguilera, V. Souza-Egipsy, P. San Martín-Úriz, R. Amils
    Appl Microbiol Biotechnol 78 1079–1088 2008

    Afficher le résumé
    A General Method for Constructing Optically Active Supramolecular Assemblies from Intrinsically Achiral Water-Insoluble Free-Base Porphyrins
    Y. Zhang, P. Chen, M. Liu
    Chem. Eur. 14 1793 – 1803 2008

    Afficher le résumé
    LC/MS/MS structure elucidation of reaction intermediates formed during the TiO2 photocatalysis of microcystin-LR
    M. G. Antoniou, J. A. Shoemaker, A. A. de la Cruz, D. D. Dionysiou
    Toxicon 51 1103–1118 2008

    Afficher le résumé
    Differential expression of chicken hepatic genes responsive to PFOA and PFOS
    L.W.Y. Yeung, K.S. Guruge, N. Yamanaka, S. Miyazaki, P.K.S. Lam
    Toxicology 237 111–125 2007

    Afficher le résumé
    Aligned Nanocables: Controlled Sheathing of CuO Nanowires by a Self-Assembled Tubular Glycolipid
    Y. Zhou, S. Kamiya, H. Minamikawa, T. Shimizu
    Adv. Mater 19 4194–4197 2007

    Afficher le résumé
    Simultaneous determination of trace levels of ethylmercury and methylmercury in biological samples and vaccines using sodium tetra(n-propyl)borate as derivatizing agent
    D. Gibičar, M. Logar, N. Horvat, A. Marn-Pernat, R. Ponikvar, M. Horvat
    Anal Bioanal Chem 388 329–340 2007

    Afficher le résumé
    A thermo extraction–UV/Vis spectrophotometric method for total iodine quantification in soils and sediments
    B. S. Gilfedder, F. Althoff, M. Petri, H. Biester
    Anal Bioanal Chem 389 2323–2329 2007

    Afficher le résumé
    Ultraperformance Liquid Chromatography-Tandem Mass Spectrometry Analysis of Stimulatory Drugs of Abuse in Wastewater and Surface Waters
    M. Huerta-Fontela, M. Teresa Galceran, F. Ventura
    Anal. Chem. 79 3821-3829 2007

    Afficher le résumé

    C10117The most advanced ultrapure water system producing Milli-Q® water quality

    Milli-Q® Advantage A10 has been designed to deliver the highest quality ultrapure water for all your applications, even the most critical ones. It is adapted to suit every user’s needs in today’s demanding laboratory environment. The system produces ultrapure, Type 1 water from a pretreated water source. It features two separate and distinct components:

    • The Milli-Q® production unit – compact, it can be placed wherever it best suits you.
    • The Q-POD®, Quality-Point-Of-Delivery unit – always within reach, it brings ultrapure water right where you need it.

    Milli-Q® water • Best-in-class purity

    To reach the most reliable ultrapure water quality, Milli-Q® is built on an optimized purification sequence:

    • Pure water, ideally from an Elix® system, first enters the Q-Gard® purification cartridge selected based on the feed water source.
    • Purified water then passes through a long-life dual wavelength UV lamp, which ensures organic molecule degradation by photooxidation.
    • Next, the Quantum® polishing cartridge removes ionic and organic contaminants below trace levels.
    • Finally, the ultrapure water recirculates through a loop to the Q-POD® unit, where an Application-Pak removes specific contaminants critical for your experiments – Ultrapure water free of particulates, bacteria, pyrogens, nucleases, proteases, VOCs, endocrine disruptors and organics for LC.

    Made only for Milli-Q® systems, Jetpore® virgin ion-exchange resin is used in all Milli-Q® purification cartridges. Selected for its exceptional performance, it can capture even the most weakly charged ions due to its kinetic capabilities. Both Q-Gard® and Quantum® cartridges also incorporate RFID technology. This provides instant visibility on cartridge parameters and also ensures a safe & optimal performance of your system, giving you full traceability.

    Q-POD® dispenser • Advanced technology

    The Q-POD® dispenser simplifies operation and displays essential data in an easy-to-use and compact device.

    • Facilitate your daily lab work - The Q-POD® remote dispenser is always within reach. Its convenient and adaptable handling enables both intuitive and precise dispensing. The user can select either a specific volume with the autofill key or manually press the plunger. Its multicolor graphic display allows easy interaction with the system and provides information about water quantity and quality.
    • Free up space on your bench - As only the Q-POD® is necessary for daily needs, the system can now be placed where it is most convenient – under the bench, on the wall… Up to three Q-POD®s can be used with each production unit at different locations within the same laboratory.
    • Get the right water quality for your experiments – Fitted to each Q-POD®, an Application-Pak provides final polishing to match the water quality according to your application’s exact needs. A range of POD-Paks is available for you to select from.

    Total control for peace of mind

    The combination of both resistivity and Total Organic Carbon (TOC) monitoring allows control over both ionic and organic contaminants that can impact research results. Calibrated meters are used to measure the quality of ultrapure water.

    • Accurate A10® TOC monitor
    • High-sensitivity resistivity cells

    To always ensure the finest quality is available, the Milli-Q® Advantage A10 integrates advanced control settings with alerts & alarms that are customizable according to your specific needs. This is to validate your system is properly operating, providing the best working conditions for your experiments. With easily replaceable cartridges, a long-lasting UV lamp and timely service alerts, the system runs smoothly all year long. In addition, routine maintenance and troubleshooting procedures are available to assist the user in performing specific tasks. Millitrack® e-Solutions provide enhanced data management control, remote access capabilities to the system dashboard, and long-term electronic archiving for your Milli-Q® Advantage A10.

    Quality certificates

    For full confidence in your Milli-Q® Advantage A10 system, it is delivered with a Certificate of Calibration for the built-in temperature and resistivity meters, and a Certificate of Conformity ensuring that it has been built and tested fully assembled following internal Standard Operating Procedures. In addition, all Milli-Q® Advantage A10 consumables are delivered with their Certificate of Quality. The manufacturing site is ISO® 9001 v.2000 and ISO® 140001 certified.

    Advanced support & validation

    A complete range of Services, including Validation support, is provided by certified Field Service Engineers using calibrated equipment and Qualification Workbooks. Millitrack® Compliance e-Solution has been designed specifically for the pharmaceutical, biotech and contract labs that follow GxP regulations (GLP, GCP, or cGMP regulations). Activation of Millitrack® Compliance software combined with Qualification Services will enable full water purification system compliance with record saving, electronic signature and auditing criteria guidelines such as those of FDA Title 21 CFR Part 11 or similar requirements set by other global regulatory organizations. A report on conformity of Milli-Q® Advantage A10 water quality to Type 1 water quality as described by ASTM®, ISO® 3696 and CLSI® norms, and to Purified Water as described in USP and EP is available upon request.

    “The POD system allows us to focus on our research rather than watching containers fill with water. All we have to do is set the POD to dispense a specified amount of water and it does it automatically — no one has to stand there and turn off the system once the container is full.” Kris Gellynck, Ph.D., Senior Scientist, Orthox Ltd., Oxford U.K.

    Water Specifications

    Milli-Q® Advantage A10 ultrapure water (Type 1)

    Resistivity at 25 °C* 18.2 MΩ•cm
    TOC** ≤ 5 ppb
    Particulates (size > 0.22 µm)*** < 1 particulate/mL
    Bacteria*** < 10 CFU/100mL
    Pyrogens (endotoxins)**** < 0.001 EU/mL
    RNases**** < 1 pg/mL
    DNases**** < 5 pg/mL
    Flow Rate Up to 2 L/min
    * Resistivity can also be displayed non-temperature-compensated as required by USP
    ** In the appropriate test conditions
    *** With Millipak® or Biopak® final filters
    ****With Biopak® Polisher
    These values are typical and may vary depending on the nature and concentration of contaminants in the feed water.

    Feed water

    Feed water quality Elix®, RiOs™, distilled or DI water with conductivity
    Feed water connection ½” Gaz M
    Feed water pressure* 0 - 0.3 bar
    Feed water temperature 5 - 35 °C
    * For pressure above 0.3 bar, a pressure regulator needs to be installed upstream of the system; for pressures between 0 and -0.2 bar, the system will operate, but product flow rate may be lower.

    System Specifications

    Production unit

    Dimensions (H x W x D) 500 x 332 x 360 mm (19.5 x 13.0 x 14.2 in)
    Operating weight 19 kg (41.9 lb)
    Electric power supply voltage 100 - 230 V +/- 10%
    Electric power supply frequency 50 - 60 Hz
    Main unit data connection Ethernet (RJ45)

    Q-POD® dispenser

    Dimensions (H x D) 579 x 230 mm (22.8 x 9.0 in)
    Operating weight 5.5 kg (12.1 lb)
    Dispenser tubing length 0.8 m (31.5 in)
    Distance from production unit to Q-POD® 2.9 m (9.5 ft)
    Electric power cable length 2.9 m (9.5 ft)
    Q-POD® data connection Parallel port (25-pin D-Sub)

    Safety

    The Milli-Q® Advantage A10 system is tested by an independent and accredited company for compliance with the CE directives related to safety and electromagnetic compatibility. The report can be consulted on demand. The Milli-Q® Advantage A10 system is built using components and practices recommended by UL and has been cUL marked. The registration can be verified on the UL web site (http://www.ul.com).